Crosby

Crosby

Round Pin Shackles

Round Pin Shackles can be used in tie down, towing, suspension or lifting applications where the load is strictly applied in-line.
Round pin shackles should never be used in rigging applications to gather multiple sling legs, or where side loading conditions may occur.

G-213
Round Pin Anchor Shackles
Meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 1, except for those provisions required of the contractor.
Nominal Size (in)
1/4to2
Working Load Limit (t)
1/2to35
G-215
Round Pin Anchor Shackles
Meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 1, except for those provisions required of the contractor.
Nominal Size (in)
1/4to2
Working Load Limit (t)
1/2to35

Screw Pin Shackles

Screw Pin Shackles are used in Pick and Place* applications.

For permanent or long-term installations, Crosby recommends the use of bolt type shackles.

Screw pin shackles can be used for applications involving side-loading circumstances. Reduced working load limits are required for side-loading applications.

While in service, do not allow the screw pin to be rotated by a live line, such as a choker application.

* Pick and Place application: Pick (move) a load and place as required. Tighten screw pin before each pick.

G-209
Screw Pin Anchor Shackles
Meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 2, except for those provisions required of the contractor.
Nominal Size (in)
3/16to2-1/2
Working Load Limit (t)
1/3to55
G-210
Screw Pin Chain Shackles
Meet the performance requirements of Federal Specification RR-C- 271G, Type IVB, Grade A, Class 2, except for those provisions required of the contractor.
Nominal Size (in)
1/4to2-1/2
Working Load Limit (t)
1/2to55
G-209A
Alloy Screw Anchor Pin Shackles
Meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade B, Class 2, except for those provisions required of the contractor.
Nominal Size (in)
3/8to1-3/8
Working Load Limit (t)
2to21
G-209T
Screw Pin Theatrical Shackles
Meet the performance requirement of Federal Specification RR-C-271G, Type IVA, Grade A, Class 2, except for those provisions required of the contractor.
Nominal Size (in)
3/8to3/4
Working Load Limit (t)
1to4-3/4

Bolt Type Shackles

Bolt-Type Shackles can be used in any application where round pin or screw pin shackles are used. In addition, they are recommended for permanent or long term installations and where the load may slide on the shackle pin causing the pin to rotate. The bolt-type shackle’s secondary securement system, utilizing a nut and cotter, eliminates the requirement to tighten nut before each lift or movement of load.

G-2130
Bolt Type Anchor Shackles
Meets the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 3, except for those provisions required of the contractor.
Nominal Size (in)
3/16to4
Working Load Limit (t)
1/3to150
G-2130CT
COLD TUFF® Bolt Type Anchor Shackles
Meet the performance requirements of Federal Specification RR-C- 271G, Type IVB, Grade A, Class 2, except for those provisions required of the contractor.
Nominal Size (in)
3/4to1-3/4
Working Load Limit (t)
4-3/4to25

G-2140
Alloy Bolt Type Anchor Shackles
Meets the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade B, Class 3, except for those provisions required of the contractor.
Nominal Size (in)
3/8to7
Working Load Limit (t)
2to400
G-2140CT
COLD TUFF® Alloy Bolt Type Anchor Shackles
Meet the performance requirement of Federal Specification RR-C-271G, Type IVA, Grade A, Class 2, except for those provisions required of the contractor.
Nominal Size (in)
1-1/2to5
Working Load Limit (t)
30to250

G-2150
Bolt Type Chain Shackles
Meets the performance requirements of Federal Specification RR-C-271G, Type IVB, Grade A, Class 3,except for those provisions required of the contractor.
Nominal Size (in)
1/4to3
Working Load Limit (t)
1/2to85
G-2160
Wide Body Shackles
Type approved and certification to DNV Rules for Certification of Lifting Appliances, and are produced in accordance with DNV MSA requirements.
Nominal Size (in)
N.A.toN.A.
Working Load Limit (t)
7to1550

G-2135
Bolt Type Anchor Shackles
DNV type approved: DNVGL-ST-0377 and DNVGL-ST-0378.
Meets performance requirements of federal specification RR-C-271F, except for those provisions required of the contractor.
Nominal Size (in)
3to11
Working Load Limit (t)
85to1500
G-2145
Bolt Type Anchor Shackles
DNV type approved: DNVGL-ST-0377 and DNVGL-ST-0378.
Meets performance requirements of federal specification RR-C-271F, except for those provisions required of the contractor.
Nominal Size (in)
3to4
Working Load Limit (t)
120to175

Easy-Loc Shackles

Bolt-Type Shackles can be used in any application where round pin or screw pin shackles are used. In addition, they are recommended for permanent or long term installations and where the load may slide on the shackle pin causing the pin to rotate. The bolt-type shackle’s secondary securement system, utilizing a nut and cotter, eliminates the requirement to tighten nut before each lift or movement of load.

G-2140E
Alloy Easy-Loc Shackles
Meets the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade B, Class 3, except for those provisions required of the contractor.
Nominal Size (in)
4-3/4to6
Working Load Limit (t)
200to300
G-2160E
Easy-Loc Wide Body Shackles
Shackles have DNV Type Approval to Rules for Certification of Lifting Appliances, and are produced in accordance with DNV MSA requirements.
Nominal Size (in)
N.A.toN.A.
Working Load Limit (t)
75to300

BlokCam

BlokCam is a crane camera system specifically designed to aid a crane operator to visually see the loads attached below the hook or boom from any crane cab.

The sound and view from below the camera is transmitted and received wirelessly via the antenna systems to a screen in the cab. This allows the operator to see and hear the load and surroundings, giving an unobstructed, live, audio-visual feed of the critical areas that working in the blind would never allow.

X3L Camera System for Tower Crane

M3L Camera System for Mobile & Telescopic Cranes

SENSOR (S5)

The S5 is a 113° wide angle lens. The low profile design, tool free operation and rotatable lens allows for easy installation on any side of the hook block including in between the cheek plates.

TRANSMITTER (T3)

T3 dramatically improves the most important aspects of the BlokCam. The combination of performance, specification, aesthetics and 71mm low profile design make this a must for all crane operations.

BATTERY (B6)

B6 is a non-hazardous 14.54v Battery Pack. The clever tool-free design and easy grip finger slots make it easy to install, remove and charge.

REPEATER (R5)

Depending on the crane type and required installation the Repeater is mounted on the jib, boom tip or cab. The Repeater has been specifically designed for fast, wireless, telescopic deployment.

PROCESSOR (P3)

The purpose built Processor can project multiple high definition images and audio’s through a single HDMI lead with less than 0.2 seconds of latency. The design of the Processor accomodates multivoltage AC and DC inputs making your BlokCam system compatible across all types of cranes. The Processor also provides power to the monitor, eliminating the need for a secondary socket or power supply.

MONITOR (M2)

HD Monitor is a 10.1 inch 16:9 LCD monitor with built in speakers and a HDMI input. It has a 1280 x 800 pixel panel with automatic brightness control.

BATTERY CHARGER

B6-CH3 is a 4-cell Li-Ion battery charger. It has 3 step charge control with current detection as charge termination. Input voltage 90-264 VAC LED Charge Indicator (Orange – Fast charge, Yellow – Top-off charge, Green – Charged).

MONITOR (M3)

The M3 is an all in one display that combines a monitor, repeater and processor in to a purpose built fast fit system.

The M3 has a HD display with built in speakers, automatic brightness control, less than 0.2 seconds of latency and multivoltage AC and DC inputs.

BlokAlert

BlokAlert is a wireless, audio-visual warning system that can be quickly and easily deployed to the hook block of a crane.

When activated by the lifting crew, the BlokAlert receiver gives out a recognisable audio-visual signal that can be seen and heard by site personnel in proximity to the hook block or load.

This forewarns the workforce to the position and movements of the hook block, increases awareness and reduces the risk of being struck by the crane’s hook block, lifting accessories or load.

HOW BLOKALERT WORKS
1a The lifting crew/rigger 
The handheld fob is activated by the riggers or lifting crew. When operated, the signal is transmitted to the receiver on the hook block of the crane.
and/or
1b In the operator’s cab
The transmitter is activated by a footswitch in the crane cab. When operated, the signal is transmitted to the receiver on the hook block of the crane.
2  On the hook block
On receipt of a signal from a transmitter, the Receiver is activated, alerting the workforce to the proximity of the hook block
BLOKALERT RECEIVER (BA-R1)

Along with the LED Beacon, the BlokAlert Receiver is capable of up to 528 different audible warnings.
This audio-visual warning system, combined with great functionality, performance and design make this a must for all lifting operations.

BLOKALERT FOB – 4 BUTTON (60009)

The BlokAlert Fob allows the riggers to operate multiple BlokAlert systems across your site.

BLOKALERT TRANSMITTER (BA-T2)

Through the use of a footswitch, the BlokAlert Transmitter gives the crane operator, hands free operation of the BlokAlert System.

FOOTSWITCH (FS1)

The Footswitch provides the hands-free operation of the BlokAlert Transmitter. It is quick and easy to install.

Sling Hooks

L-1327
Eye Sling Hook
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
1-1/432
Working Load Limit (lb)
3,200to90,400
L-1339
Clevis Sling Hook
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
7/823
Working Load Limit (lb)
1/2to35

SHUR-LOC Hooks

S-1316
SHUR-LOC® Eye Hook with Positive Locking Latch
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
126
Working Load Limit (lb)
3,200to50,700
S-1317
SHUR-LOC® Clevis Hook
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
7/823
Working Load Limit (lb)
1/2to35
S-1316AH
SHUR-LOC® Eye Hook with Positive Locking Latch
Grade 100 Alloy Chain
(in)(mm)
5/816
ToTo
126
Working Load Limit (lb)
22,600to59,700
S-13326H
SHUR-LOC® Handle Swivel Hooks with Bearings
Grade 100 Alloy Chain
(in)(mm)
5/816
ToTo
126
Working Load Limit (lb)
22,600to59,700
S-1326
SHUR-LOC® Swivel Hooks
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
7/822
Working Load Limit (lb)
2,560to34,160
S-13326
SHUR-LOC® Swivel Hooks with Bearing
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
5/816
Working Load Limit (lb)
3,200to22,600
S-1318A
SHUR-LOC® Shank Hook
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
1/213
Working Load Limit (lb)
3,200to15,000

Grab Hooks

A-1328
Eye Grab Hook
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
1-1/432
Working Load Limit (lb)
5,700to90,400
A-1348
Eye Grab Hook
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
5/816
Working Load Limit (lb)
5,700to22,600
A -1338
Cradle Grab Hook
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
5/816
Working Load Limit (lb)
4,300to22,600
L-1338
Cradle Grab Hook with Latch
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
5/816
Working Load Limit (lb)
4,300to22,600
A -1358
Grab Hook
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
5/816
Working Load Limit (lb)
4,300to22,600
L-1358
Grab Hook with Latch
Grade 100 Alloy Chain
(in)(mm)
1/46
ToTo
5/816
Working Load Limit (lb)
4,300to22,600
A -323
Eye Grab Hooks
Grade 80 Alloy Chain
(in)(mm)
1/47
ToTo
3/419
Working Load Limit (lb)
4,300to22,600
L-330
Clevis Grab Hooks
Grade 80 Alloy Chain
(in)(mm)
1/47
ToTo
3/419
Working Load Limit (lb)
4,300to22,600

Chain Hooks

S-315A
Eye Chain Hook with Integrated Latch
Grade 80 Alloy Chain
(in)(mm)
1/46
ToTo
5/816
Working Load Limit (lb)
2,500to18,100
S-314A
Clevis Chain Hook with Integrated Latch
Grade 80 Alloy Chain
(in)(mm)
1/47
ToTo
5/816
Working Load Limit (lb)
2,500to18,100

Chain Nest Hooks

O-318
Chain Nest Hooks
HO-318 Hooks utilize Crosby SHUR-LOC® positive locking hooks. Latch is self-locking when hook isloaded.
Grade 80 Alloy Chain
(in)(mm)
1/46
ToTo
9/1616
Working Load Limit (t)
1.5to3.8
O-319
Chain Nest Hooks
O-319 Hooks utilize Crosby® standard 319 Shank Hooks which incorporate QUIC-CHECK® deformation and angle indicators. 
Grade 80 Alloy Chain
(in)(mm)
1/46
ToTo
9/1616
Working Load Limit (t)
1.5to3.8

Golden Gate Hooks

GATE TYPE
Brass alloy Golden Gates® are engineered for quality, easy handling and dependability. The heavy duty, corrosion resistant locking mechanism will stay locked until an operator releases it; yet, can easily be shut with one hand. Cost effective, these gates reduce down time, providing the alternative to conventional latches.
LIF-LOK® GATE 
SIZE 1
To lock:
Close the gate; the built-in spring locks the gate against the hook tip.
To Unlock:
Lift the gate upward on the hook shank and swing open.
PIN-LOK® GATE 
SIZE 2 through 4
To lock:
Close the gate; a stainless steel pin is carried in a horizontal bore and engages a milled slot in the hook shank.
To Unlock:
Simply depress the stainless steel pin which causes the pin to disengage from the milled slot.
ROLLOX® GATE 
SIZE 5 through 9
To lock:
Close the gate; a stainless steel pin is mounted in a horizontal bore which passes through the gate and engages a notch milled in the hook shank.
To Unlock:
Move the lever downward a quarter-turn or until it stops, the gate can now swing open 160 ° (approx.)
TIP-LOK® GATE 
SIZE 10 through 17
To lock:
Press the arm down until the lock trips; two arms of the gate now enclose the tip of the hook.
To Unlock:
Manually depressing the locking trigger automatically raises the movable arm, allowing the gate to be rotated open.
GATE TYPE
The 5 connector styles shown below make it possible for Crosby to furnish a Golden Gate Hook to fit almost any make or model of hoisting equipment including, American Engineering Lo-Hed, ARO, Coffing, Electro Lift, Ingersoll-Rand, P & H, Robbins and Myers, Shepard Niles, CM, Shaw-Box, Wright, Yale & Towne.
CLOSED SWIVEL BAIL
Hook sizes: 1 through 14.
For use where hoisting line or shackle can be inserted into the bail. Suitable for positioning before lifting.
Style
Cwith self-closing gate.
Awith manual-closing gate
Working Load Limit (t)
0.45to16.7
STANDARD SHANK-TYPE HOOK
Hook sizes: 2 through 14.
For use on existing load blocks, with standard shank length.
Style
Dwith self-closing gate.
Bwith manual-closing gate
Working Load Limit (t)
0.91to16.8
LONG SHANK-TYPE HOOK
Hook sizes: 4 through 17.
For use on existing load blocks requiring extra shank length.
Style
Kwith self-closing gate.
Lwith manual-closing gate
Working Load Limit (t)
1.45to60.0
UNIVERSAL TYPE
Hook sizes: 3, 4 and 5
Open swivel bail for attachment to link chain. Suitable for positioning before lifting.
Style
Ewith self-closing gate.
Gwith manual-closing gate
Working Load Limit (t)
1.3to2.1
LINK CHAIN NEST
Hook sizes: 4, 5, and 7
With ball-bearing swivel; attaches to chain by an alloy pin. Suitable for frequent rotation under load.
Style
Owith self-closing gate.
Pwith manual-closing gate
Working Load Limit (t)
1.5to3.8

Choker Hooks

A-1355
Chain Choker Hook
Grade 100 Alloy Chain
(in)(mm)
1/47
ToTo
5/816
Working Load Limit (lb)
5,700to22,600
A-350L
Sliding Choker Hook
Single Part Rope Size
(in)(mm)
3/810
ToTo
125
Working Load Limit (lb)
2,500to15,000

Foundry Hooks

  • Forged alloy steel — Quenched & Tempered.
  • Suitable for use with Grade 100 and Grade 80 chain.
  • Hook can be tip loaded at the reduced Working Load Limit
  • Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit.
A-1329
Eye Foundry Hook
Grade 100 Alloy Chain
1/47
toto
1-1/432
Working Load Limit (lb)
SaddleTip
5,7002,850
toto
90,40045,200
A-350L
Clevis Foundry Hook
Grade 100 Alloy Chain
1/47
toto
7/823
Working Load Limit (lb)
SaddleTip
4,3002,150
toto
44,10022,050

Special Application Hooks

Swivels

ROV Shackles

G-209R
ROV Release & Retrieve Shackle ─ QUIC-Threaded
Forged steel, Quenched & Tempered, with alloy pins.
All ROV shackle bows are galvanized, then painted fluorescent yellow.
Look for the Red Pin®… the mark of genuine Crosby quality.
Working Load Limit (t)
9.5to85
No. 863
ROV Release Shackle
Meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 1, except for those provisions required of the contractor.
Working Load Limit (t)
6.5to55
G-2100
ROV Release & Retrieve Shackle ─ QUIC-Threaded
Patented captured bolt can withstand over 2,000 lb (907 kg) of pull-out force.
API RP 17H compliant 316 stainless steel handles available in T, D, F, and Eye models (sold separately).
Working Load Limit (t)
9.5to85
G-2110
ROV Release & Retrieve Shackle ─ QUIC-Threaded
Patented captured bolt can withstand over 2,000 lb (907 kg) of pull-out force.
API RP 17H compliant 316 stainless steel handles available in T, D, F, and Eye models (sold separately).
Working Load Limit (t)
9.5to85

ROV Handle

G-42100H ROV Handles
New Interchangeable handles for ROV shackle bolts.
For use with G-2100 and G-2110 ROV shackles only.
Handles are stainless steel and painted fluorescent orange.
“D” and “F” handle kits available containing handle, retaining bolts, and individual packet of Loctite for easy installation.
Handles are RFID equipped.
“D” Handle

“F” Handle

“Eye” Handle

“T” Handle

ROV Hooks

L-562A
ROV Eye Shank Hooks
Large shank for ROV grip. Cable guides allow for remote latch operation with installed cables.
Working Load Limit (t)
5.4to175
L-320R
ROV Hooks
ROV eye hook. Cable guides allow for remote latch operation with installed cables.
Working Load Limit (t)
3.2to60