Hydraulics

Fire Armor 3000 BOP

Part Number	HOSE I.D.		HOSE O.D.		WORKING PRESSURE		MINIMUM BEND RADIUS		WEIGHT		FITTING SERIES
	inch	mm	inch	mm	psi	MPa	inch	mm	inch	mm
FA21-6	3/8	10	1	25.4	3000	21.0	2.5	65	0.54	0.8	43
FA21-8	1/2	12.5	1.2	28.45	3000	21.0	3.5	90	0.64	0.95	43
FA21-12	3/4	19	1.37	34.8	3000	21.0	4.75	120	1.21	1.8	43
FA21-16	1	25	1.66	42.16	3000	21.0	6	150	1.66	2.47	43

FA21

• For general applications where flame resistance is required
• Braided construction offering constant 3000 psi in all sizes
• Lloyd’s certified to API 16D flame test requirements
• 1/2 SAE bend radius
• Thick red synthetic flame resistant rubber cover
• Assembled with insulating sleeve to meet flame test requirements
• 43 Series fittings available in male NPT threads

Fire Armor 5000 BOP

Part Number	HOSE I.D.		HOSE O.D.		WORKING PRESSURE		MINIMUM BEND RADIUS		WEIGHT		FITTING SERIES
	inch	mm	inch	mm	psi	MPa	inch	mm	inch	mm
FA35-8	1/2	12.5	0.97	25.2	5000	35.0	7	180	0.73	1.08	VS
FA35-12	3/4	19	1.27	32.4	5000	35.0	9.5	280	1.14	1.7	V4
FA35-16	1	25	1.52	39.0	5000	35.0	12	340	1.48	2.2	V4
FA35-20	1 1/4	31.5	1.79	46.6	5000	35.0	16.5	460	1.75	2.6	V4
FA35-24	1 1/2	38	2.26	58.7	5000	35.0	20	480	3.23	4.8	V6
FA35-32	2	51	2.8	72	5000	35.0	25	600	4.5	6.7	V6

FA35

• Spiral construction offering constant 5000 psi
• Lloyd’s certified to API 16D flame test requirements
• Red synthetic flame resistant rubber cover
• V Series fittings available in male API and NPT threads

Optional Armor Version

• Metal armor cover protects against external damage, heat & flame
• Armor available in 304 stainless steel
• Lloyd’s certified to API 16D flame test requirements

Hotline Hoses – 2390N

2390N/2380N – For applications requiring high tensile strength and improved mechanical resistance:

• Steel wire reinforcement
• Available with two core tube options — PA12 or methanol-washed PA11
• Low dimensional change under pressure and a smooth bore for low pressure drop service life

Construction

• Core tube: Polyamide
• Reinforcement: 575X – Braided aramid fiber 2440N- High strength wire
• Jacket: Polyurethane Optional secondary reinforcement jacket (also Polyurethane); 2440N PA12
• Colors: Black

Operating Parameters

• Temperature Range: -40°F to +212°F (-40°C to +100°C)
• Minimum Burst Pressure is 4 x Max. Working Pressure
• Max.Elongation @ W.P.: 575X ±2% 2440N +2% / -1.5%

Certifications

• 575X
• SAE J343
• DNV 2.9 No. 5-791.70
• 2440N
• ISO 13628-5

Subsea Blowout Preventer Stack Hoses

Parker’s BOP stack hoses have a flexible, compact design with a low minimum bend radius which makes them the ideal choice for efficient plumbing of BOP stack hydraulic lines.

• Available with blue, yellow or green jacket colors for POD identification
• Low volumetric expansion
• Smooth bore for low pressure drop
• Sea-water resistant polyurethane jacket
• For use with specially designed subsea fittings that prevent water ingression
• Dual Seal Flange and JIC connections
• Offered in 45° and 90° bent tube configurations, as well as, straight fittings

* Design Factor 4 = 4060; 3.24 = 5002
**Typical value is ≥ value shown in table at minimum bend radius acc. to ISO 13628-5

Construction

• Core tube: Thermoplastic polyamide
• Reinforcement: 2 closed spiral layers and 2 open spiral layers of high strength wire
• Jacket: Sea water resistant Polyurethane
• Colors: Blue, Green or Yellow

Operating Parameters

• Temperature Range: -40°F to +212°F (-40°C to +100°C) at a 4:1 design factor; Max of +158°F (+70°C) for water, glycol or methanol-based fluids
• Max.Elongation @ W.P.: +2% / -1.5% Minimum Burst Pressure is 4 x Max. Working Pressure